U-Line 3018CLR SERIES Installationsanleitung Seite 9

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 18
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 8
u-line.com 7
Overlay / Frame Overlay Panel
NOTICE
Due to differences in surrounding cabinetry the panel may
not perfectly align with door. The procedure below is
designed to provide a finished overlay panel that seamlessly
integrates with surrounding cabinetry.
Panel Preparation
A full overlay door panel completely covers the door frame and
provides a built-in appearance.
NOTICE
The door panel must not weigh more than 20 lbs (9.1 kg).
It is important to ensure that all drilled holes are drilled to
the correct depth in order to avoid splits in the wood
when hardware is installed.
Appliance will need up to 34-1/2" (876 mm) to the under
side of the counter to leave room for leveling adjustments.
1. Cut the panels to the dimensions listed in the diagram below.
2. Optional: Stain or Finish panel to desired stain or color. Be sure to
closely follow the instructions provided by the manufacturer.
NOTICE
If finishing frame overlay, both sides of overlay must be
finished in order to prevent warping.
3. Optional: Install handles and hardware.
Panel Installation
1. Fully open door,
2. Starting at corner, pull gasket
away from door.
3. Continue to pull gasket free
from gasket channel.
4. Upon removal, lay gasket down
on a flat surface.
7 3000 Series Overlays
BACK SURFACE MUST HAVE AMPLE FLAT SURFACE
TO MOUNT OVERLAY PANEL FLAT AND WITHOUT
INTERFERENCE
3/4"
(19 mm)
Solid Overlay
17-1/2"
(445 mm)
30"
(762 mm)
Overlay Panel Dimensions
Seitenansicht 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare