U-Line BI-2115 Installationsanleitung PDF herunterladen (Seite 3)

BI-2115 — Ice Maker

08/2006 3 www.U-LineService.com

General Precautions

Use this appliance for its intended purpose only and

follow these general precautions along with those listed

throughout this guide:

WARNING

SHOCK HAZARD — Electrical Grounding Required.

• Keep the unit unplugged throughout installation

except during testing.

• Never remove the round grounding prong from

the plug and never use a two-prong grounding

adapter.

• Never use an extension cord to connect power to

the unit.

• Always keep your working area dry.

CAUTION

• Use care when moving and handling the unit. Use

gloves to prevent personal injury from sharp edges.

• Do not lift the unit by the door or door handle.

• Do not install the unit behind closed doors or in any

way that would obstruct airflow to the front grille,

which may cause the unit to malfunction.

You have received a carton containing your BI2115 Ice

Maker with a package inside containing a Use and Care

Guide, a Product Registration Card and water connection

parts. Complete and mail the Product Registration Card or

is installed, keep the Use and Care Guide and this

Installation Guide in a safe place for future reference.

Your unit is Black, White or Stainless Steel. Black and

White units have a reversible door with a slightly

contoured handle across the top. They come with a flush

mounted door panel that, when removed, will accept a

custom 1/4-inch thick door panel or a 3/4-inch thick full

overlay door panel. Stainless Steel units are covered with

a protective coating and have been ordered left- or right-

hand hinged. The Stainless doors are not reversible and

do not accept custom panels. Please carefully follow the

directions that apply to your unit and your intended

design.

Tools/Materials Required

• Screwdrivers — slotted and Phillips head

• 1/4-inch OD copper tubing and shut-off valve for water

supply line

• 1/4-inch thick door panel material and cutting tools

(Black or White units) (If installing a 1/4”Panel)

• Full Overlay Door Panel Kit (part number U-OL2115B —

Black or part number U-OL2115W — White), 3/4-inch

door panel overlay, cutting tools, drill and bits (Black or

White units) (If installing a 3/4” Full Overlay)

Inspection

Unwrap and inspect the unit on a flat, level surface

capable of supporting its entire weight.

Removing Protective Coating

(Stainless Steel Units Only)

When inspecting/installing a Stainless Steel unit, the

protective coating covering the unit must be removed

first. Start at a corner of the unit/door and pull back the

protective coating to remove it from the unit/door.

2 Inspect and Plan

1 2 3 4 5 6 7 8 ... 16 17

Kommentare zu diesen Handbüchern

Keine Kommentare

U-Line BI-2115 Installationsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kühlschränke U-Line BI-2115